 The world of Transformers continues to grow and become stranger than any enthusiast or collector could ever have imagined. From the original Diaclone and Micro Change toys to the strange Transformers packaging variants of Europe, or the exclusive Japanese Transformers to the new E-Hobby repaints of reissues. However some of the the real oddities and eye-openers come from South America where the Transformers released were usually limited to the well-loved minibots and a whole host of repaints. The countries often associated with repainted and exclusively-coloured minibots are Brazil and Argentina where the toys were manufactured and distributed by Estrela and Antex respectively. In Argentina and Brazil they were marketed under the name "Robocar" and came on TF-style cards. Argentina received Bumblebee (Volks), Cliffjumper (Carrera) and Windcharger (Camaro). Brazil received Volks, Carrera, Camaro and Gears (Pick-Up), Brawn (Jipe) and Bumblejumper (Sedan). Brazil then released a second series of minibots called Optimus vs Malignus (a good vs bad scenario) with further repaints of the aforementioned minibots. One country that was previously NOT associated with exclusive minibots but is now considered to of equal significance in the minibot universe is Peru. Peru received not only the Bumblebee, Cliffjumper, Gears, Windcharger and Brawn moulds, but they also had Huffer. Bumblejumper however did not make it to Peru.
 The way these minibots were manufactured and marketed in Peru, however, is somewhat different to the way they were marketed in Argentina and Brazil. First of all, they were actually labelled "Transformers" and the toys have Hasbro/Takara copyrights! The company thought to be responsible for distributing these toys in Peru is Lynsa. They have been referred to by some Peruvian transfans as 'Lynsaformers' and apparently were marketed as such back in the day. Before I go any further I would like to thank Jose Antonio Suarez Rojas for his amazing contributions on the subject of Peruvian minibots and his constant willingness to help and assist in uncovering the mystery that surrounds these toys. Jose says that the toys came in bubbles similar to US Transformers cards with the information in Spanish instead of English. They were apparently sold in supermarkets and also in popular markets in Peru. They were cheap in comparison to the expensive Hasbro/Takara Transformers which were available in Peru at the same time. Here is a quote from Jose: "They even had TV commercials! I still remember the tune:It was something that translated would be like: Transformers, Transformers, they are not only what they seem to be, they are much more action!" The fact that these toys had their own TV commercials suggests that they were more than just some bootleg line of cheap reproductions. The fact that they are Hasbro/Takara stamped is another major indication of their significance to Transformers. However, one of the controversial aspects of the Peruvian Transformers discussion is that a number of Peruvians have never heard of Lynsa, and Frank George Valoczy of Minitropolis says that he can only find reference to Lynsa being an Argentinian plastics company. It is not entirely impossible in my opinion that Hasbro/Takara licensed these toys but did not have the facilities in Peru to manufacture them there, therefore made them in Lynsa's factories (possibly in Argentina) and exported them for sale in Peru and possibly Chile as well. This would make the situation very similar to that of the early European Transformers produced in Milton Bradley factories and with MB badges on the packaging but Hasbro/Takara markings on the toys themselves.
  The picture above was taken from an auction for a carded orange Cliffjumper from Chile. The logo in the bottom left hand corner (and on the tech spec) does appear to say "LYNSA" and it is on a Transformers card. The Cliffjumper does not have any Autobot markings or stickers and appears to have an unpainted face. I'll come on to the significance of that a little later. Jose also informs me that he believes that in Peru not only did they get Windcharger, Bumblebee, Cliffjumper, Brawn, Gears and Huffer in regular colours but also FIVE repaints of each minibot! That gives a possible total of 36 Peruvian minibots, NONE of which are the same as a US Transformer, and you're going to see why none of them are the same if you have not already. Take a look at the two pictures at the very start of this article because the three minis there are Peruvian minibots. None of them have any chrome paint, which adds to the belief that they are of bootleg quality, when in fact the quality is at least the same as the Mexican IGA Transformers. They just happen to not have any chrome on them. Also, the Bumblebees and Cliffjumpers have unpainted faces and plastic (not rubber) tires. Here is a preliminary listing of the Peruvian minibots either seen/pictured, remembered by Peruvian transfans so far:
Bumblebee:
Cliffjumper:
Gears:
Brawn:
Windcharger:
Huffer: As you can see, there are still many gaps to be filled. To again quote Jose: "With no physical confirmation but 90% true considering all the people I have asked: different versions like Green, beige, blue, white for each one. One interesting data, all the extra colors for Gears and Huffer seemed to always have had yellow plus another color. Windcharger seemed to be the one with more color variants since the 2 I have found had 2 different colors over it and occording to some friends they said there was a green and yellow one. All of this info was considered as certain after getting at least 3 different people remembering it." Until any pictures surface though, it remains hearsay and speculation although I would personally put a lot of stock in what Jose has to say. I will update this article in the future with any further confirmations and available pictures. Speaking of pictures, here are the orange/yellow and blue/yellow Gears:
  Peach/Yellow Huffer...
  Blue/Yellow Huffer and Red/Yellow Huffer...
  Yellow Bumblebee and Green/Cream Brawn (the inverse of the Brawn at the start of the article)
  As you can see with all of the Peruvian minibots, there are some very new and unfamiliar colour schemes, and a complete lack of chrome paint. They're not as simple as they first appear either, for example, I would never have thought the Blue/Yellow Huffer would have red eyes as you can see above. The Grey/Blue Windcharger and Cream/Green Brawn are of course shown right at the start of the article. Here's the peach (or orange, depending on who you speak to) Bumblebee...
   There's no rubber on the tires, the headplate is unchromed black plastic and the face is unpainted. As with all the other Peruvian minibots, there are no faction symbols or stickers of any kind. In fact, he looks very much like the orange Cliffjumper at the beginning of this article. When you add in Jose's recollections of the toys' properties in general and his recollection of the original Lynsa TV commercials and marketing campaign, I think it's a strong bet that the carded orange Cliffjumper shares the same origins as the above Peruvian minibots. Whether that particular one was purchased in Peru or Chile though remains unknown. The cards for the others though are probably very similar. The spotlight will now focus on the Blue/Yellow Gears in order to gain further insight into the properties of the Peruvian minibots.
 This blue and yellow Gears from Peru is probably one of the more common ones found so far, if you can even use the word 'common' when referring to these toys. So far at least two of these have been found in good condition that I personally know about, and that's 2 more than most of these minibots!
  You can see from the above pictures that the grill on the front of the vehicle is just yellow unchromed plastic, very much in keeping with all the other Peruvian minis found so far. Blue and yellow is a common combination used on TF minibots and continues to work well in the case of the Peruvian Gears, especially as the blue is a little darker. A lovely contrast and an attractive minibot is the result.
  Although there is no chrome paint on the toy, the rods that hold the toy together and the hubcaps/bolts on the wheels are still metal. That again goes to show that the quality of these minibots is not poor or substandard, despite the simplicity of the colour schemes and the looks due to the lack of chrome.
  Two more nice views of a minibot that tends to grow on you very quickly. There's no doubt that it is a striking colour scheme and cannot be called dull. Among all the Peruvian minibots that I've seen so far, this Gears stands out the most with the possible exception of the red and yellow Huffer. Notice also the lack of grooves in the metal hubcaps on the Peruvian Gears. So far it's the only version of Gears I have seen without the grooves on the wheelcaps.
  The first picture above shows that this Peruvian Gears has retained its Microman logo on the hood, as have all the other minibots that originally had them on display. I find that the Peruvian minibots tend to hold together and have tighter parts and joints thatn their Brazilian Estrela counterparts. Here's a closer look at the toy's copyrights under the front wheelarches:
  As I said, Hasbro/Takara stamped. These are Transformers, there's no avoiding that fact or the fact that their production was licensed by Hasbro. The only real mystery is WHERE they were produced and how many countries were they exported to? The only reason we ever found out about these toys was thanks to a number of informative Peruvian transfans. I personally don't know of any Venezuelan or Ecuadorian transfans and until we hear accounts from countries such as these we may never know the full extent of Lynsa's distribution of these toys. That is, assuming Lynsa were the only company responsible for distribution of licensed Transformers minibots in countries other than Argentina and Brazil... Onto the robot mode:
  It's really in robot mode that the lack of chrome starts having an serious effect on the toy's appearance. Usually the chrome paint on Gears would provide a very clear separation between the feet and the rest of the torso via the legs. In the case of the Peruvian Gears, it seems like one big connected section, and can give Gears a very simplified and plain look. The distinct lack of stickers also contributes to a somewhat plain appearance. In the case of the blue/yellow gears though, the contrast in colour means that he still remains striking.
   Now even though little spots on the mould look a little inferior to US Transformers (the area around the face), the joints don't exhibit the customary looseness of used South American minibots. The arms were tight enough to pose easily on this Gears. Here's a closer look at the robot head:
 The inferior moulding around the face should be a little clearer in this picture, plus Gears appears to have a semicircular section just above the middle of his mouthplate. That is a feature shared with Mexican Gears and maybe rubsign US Transformers Gears. Below are a couple of comparison pictures of the blue/yellow Peruvian gears with a pre-rub US Transformers Gears. The pictures will show the difference in blue plastic and also the unchromed Peruvian parts vs the chromed US parts:
  Now for a comparison of the Peruvian Gears alongside two Estrela Brazilian Pick-Ups:
  Notice in the top picture that unlike the Brazilian releases of the mould, Peruvian Gears actually does have the front grill positioned correctly with the grill lines running vertically, not horizontally like the Brazilian ones. The robot mode comparison shows the simplified Brazilian head sculpt but because of the lack of silver paint on Peruvian gears' face, it ends up looking just as simple, possibly simpler. The difference in chrome vs no chrome is also very apparent in the above pictures. Having said that, the Peruvian Gears has tighter joints and fits together much better in vehicle mode. So to summarise, here is what we have so far: Transformers minibots were marketed and sold (possibly imported) in Peru and most likely distributed by the company Lynsa. The toys are Hasbro/Takara stamped, come on Transformers cards with tech specs and proper names such as "Cliffjumper". Bumblebee, Cliffjumper, Gears, Brawn, Windcharger and Huffer were released in regular colours (or something very close to them) and apparently five repainted colours as well giving a total of 36 possible Peruvian minibots. The quality of the toys is higher than you would expect from looking at them, and they do have metal parts but no chrome paint and no stickers. The Bumblebees and Cliffjumpers had plastic tires and unpainted faces. Why the lack of certain paints and materials? Probably to keep costs as low as possible. And what about the future? What possible discoveries will be made? We all hope that more carded examples will surface but that could well be asking a lot. It has taken THIS long (well...2 years ago) for LOOSE samples to surface and even then in such seriously limited quantities and sometimes in damaged shape. Looking at the colours used, it is almost possible to predict what other colours are probably available; maybe red and yellow Gears, blue and yellow Brawn, blue Cliffjumpers and Bumblebees...but until they show up we can only guess and rely on childhood recollections. A lot of what I've written here may well be subject to change in the future depending on what else is uncovered by interested parties. One thing is certain, this remains a very exciting part of the Transformers universe and very much an unsolved mystery. Who on Earth would have guessed 5 years ago that there were at LEAST 30 more colours of minibots hiding away waiting to be discovered...
  My utmost and deepest thanks to Jose, Ras and Morg for providing vital information, priceless pictures and very kind contributions to make this article possible. Also if the owner of the carded orange Cliffjumper would like to come forward and claim the pictures, that's perfectly fine by me. But be prepared to be barraged with picture and info requests. Your choice ;)
All the best |